What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
Almost everyone is bound to have their own individual conception with regards to No Hot Water — Water Heater Repair.
Lots of contemporary residences take advantage of an electrical hot water heater for their furnace, as a result of its ease and also convenience of use. However, just like any other electrical appliances, problems may arise with its usage, unexpectedly. It can be really frustrating to wake up to a cold shower instead of a hot one or having your bath with water that isn't warm adequate or perhaps also warm. Whatever the instance might be, hot water heater issues can be rather nerve-racking. Thankfully, we've made a list of feasible remedies to your hot water heater concerns. There are a variety of elements that might cause most of these issues, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you turn off the major power supply for safety and security. Whatever the issue is, getting it fixed must not position too much of a concern if you comply with these steps:
Call A Specialist:
If after replacing all faulty components and resetting your temperature level, the hot water heater still isn't working, you might need to speak to a professional plumber for a specialist viewpoint. The problem with your heating unit could be that the hot and cold faucets have been switched over or it might be undersized for the amount of hot water required in your home. Whatever the instance may be, a specialist plumber would help address the issue.
Examine Your Power Supply:
As fundamental as this might seem, it is really required. Without ample power, your water heater will certainly not work. So the first thing to do when your water instantly stops working is to validate that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the breaker is the concern, just transform it off and on once again. Replace any type of busted or worn-out fuse. Check the appliance with power after these modifications to see if it's currently working.
Examine Your Thermostat:
If your water heater still isn't working or the water appearing isn't hot enough, you might need to inspect the temperature level settings on your top thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open the gain access to panel and also press the red button for temperature reset over the thermostat. This need to help heat up the water. Turn the breaker back on and inspect if the trouble has actually been dealt with.
Inspect the Burner in the Water Heater:
If it's not a power issue, after that attempt having a look at your heating element if it is still functioning. Examine each of your heating elements to make sure the issue isn't with any one of them. If any one of them is faulty, replace that component and afterwards check whether the hot water is back on.
Verdict
Hot water heater problems are not always major. A number of them result from small concerns like a blown fuse or worn-out heating element. Replacing the malfunctioning components must suffice. Nonetheless, if you are still unable to resolve the issue, give a call to your nearby plumber to find to get it taken care of.
8 possible reasons why you have no Hot Water
Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.
Water Leak
Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.
Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.
Gas Heater: Gas Leak
If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.
Gas Heater: Pilot Light Problems
There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.
Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.
Gas Heater: Faulty Thermocouple
The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.
Electric Heater: Breaker Blues
Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.
Electric Heater: Reaching The Limit
If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.
Electric Heater: Heating Element
If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.
https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/
Do you enjoy more info about Hot Water Heater Repair? Give feedback below. We will be delighted to see your feelings about this blog posting. Hoping that you come back again in the near future. Do you know about another individual who is excited by the subject? Why not promote it. Thank-you for taking the time to read it.
Schedule Appointment
Report this page